MODEL: RTSC800A3

Generac Transfer Switch, 800A | Non-Service Entrance Rated

★★★★★0.0 / 5No reviews yet

Generac RTSC800A3 non-service rated automatic transfer switch: 800A, 120/240V single-phase, NEMA 3R steel enclosure, 65,000 A withstand and 160 ms transfer time, for Generac 22 to 150kW liquid-cooled generators.

$8,095.00

Priced per project

Send us your details and we will prepare a quote for your site.

Get a Free Quote Or call 1-844-443-6776

Free Delivery Available *

* Free shipping is available for generators and transfer switches installed by Platinum Electrical Contractors. To enable this option, please select Local Pickup / Installed by Platinum at checkout.
SKU PTS-60800 Category

Generac 800A Non-Service Rated Transfer Switch (RTSC800A3)

The RTSC800A3 is the largest single-phase switch we list. It handles 800A at 120/240V with a 65,000 A withstand rating and a 160 millisecond transfer time, for large services fed by Generac liquid-cooled generators.

Rating 800 A
Type Non-Service Rated
Enclosure NEMA 3R Steel
Transfer Time 160 ms
Withstand 65,000 A
Warranty 5-Year

Best fit: the largest single-phase services and commercial buildings, where available fault current or service size rules out a 600A switch.

Why Choose the RTSC800A3?

Fast Positive Transfer

Electrically operated, mechanically held contacts with a single-coil design and a 160 millisecond transfer time.

Silver Contact Faces

Main contacts are silver plated or silver alloy to resist welding and sticking.

100% Equipment Rated

Rated for all classes of load, inductive and resistive.

Built-In Load Management

An integrated Smart A/C Module can manage up to four 24 VAC controlled HVAC loads with no extra hardware. Add Smart Management Modules and it can manage up to eight more.

Steel Floor-Standing Enclosure

A rugged NEMA 3R steel enclosure, 66 in tall, 36 in wide and 21 in deep.

For Liquid-Cooled Generators

Generac lists this size as compatible with its full 22 to 150kW liquid-cooled line.

Planning a Switch This Size

At 800A the withstand rating is often the deciding number. The 65,000 A rating gives this switch more margin than the 600A version at 42,000 A, so we check available fault current against it during the design.

It accepts conductors from 4/0 to 500 MCM. The enclosure and 337.5 lb weight match the 600A version, so the same room planning applies.

  • Weight337.5 lb (153.1 kg), so plan how it gets to the wall.
  • Space66 x 36 x 21 in, plus working clearance.
  • GeneratorsOften considered with our 100kW, 130kW or 150kW.
  • Single-phase120/240V, single-phase.

RTSC800A3 at a Glance

Generac’s sheet shows the cETLus mark for this size, so it carries a Canadian listing.

Generac’s sheet lists Evolution and Nexus controllers. If you have a newer Power Zone generator, we confirm the pairing with you before ordering.

  • ModelRTSC800A3.
  • Rating800 A, 120/240V, single-phase, open transition.
  • TypeNon-service rated.
  • EnclosureNEMA 3R, steel.
  • CertificationcETLus.
  • Withstand rating65,000 A.
  • Lug range4/0 – 500 MCM.
  • Size (H x W x D)66 x 36 x 21 in (167.6 x 91.4 x 53.3 cm).
  • Weight337.5 lb (153.1 kg).
  • Warranty5-year limited.

Supplied and Installed Across Ontario

Generator Experts is the generator side of Platinum Electrical Contractors, a licensed Ontario electrical contractor working since 1991. We size the switch against your service, handle the wiring, permit and ESA inspection as part of generator installation, and look after the system afterwards with maintenance plans and service and repair. See all our transfer switches if you are comparing sizes.

Planning a Large Single-Phase Service?

Send us your electrical drawings, and we will confirm whether the RTSC800A3 is suitable.

Book a Consultation

Frequently Bought Together

Installation Request
Address
Address
City
State/Province
Zip/Postal

Maximum file size: 268.44MB

How urgently do you need it?
Start Over

Thank You For Requesting a Quote!

A member of our team will be in touch shortly to discuss how we can help to meet your needs.