Generac 22 kW Home Standby Generator – G0072600

Cellular/WiFi/BlueTooth

Model: G0072600

$8,800.00

When the utility power fails, your home doesn’t have to. The Generac 22kW Home standby generator is a permanently installed backup power system that automatically detects an outage and restores power through a compatible automatic transfer switch helping keep essential circuits and comfort systems running (HVAC blowers, sump pumps, refrigeration, internet, lighting, and more).

This next-generation platform combines Generac’s purpose-built G-Force™ engine design, Power Zone™ 200 controller, and Mobile Link® connectivity (cellular standard, plus Wi-Fi and Bluetooth) for smart monitoring and dependable standby performance.

*Free delivery available*
SKU PRG-10018-1 Categories , ,

Generac 22kW Home Standby Generator

The Generac 22kW home standby generator delivers automatic backup power for larger homes and critical household systems. It offers clean, utility-quality power, remote monitoring, durable weather protection, and flexible natural gas or liquid propane operation.

Key Benefits

  • Automatic backup operation starts when utility power fails, with programmable delay settings.
  • Clean power output with True Power™ Electrical Technology and <5% THD for sensitive electronics.
  • Built for harsh weather with a sound-attenuated enclosure rated for winds up to 150 mph (241 km/h).
  • Flexible installation as close as 18 in (457 mm) to a structure when installed to code.
  • Remote monitoring through Mobile Link® for status, alerts, diagnostics, and service support.

What’s Included

  • Wi-Fi™, Bluetooth™, and standard cellular connectivity
  • Electronic fuel & ignition control (EFIC)
  • Hydraulic lifters
  • Smart Exercise Technology
  • Power Zone™ 200 controller
  • Electronic governor
  • Oil level sensor
  • LED status and maintenance indicators
  • Sound-attenuated enclosure
  • Natural gas or LP gas operation
  • 5-year limited warranty
Bundle note: Bundled models include a 200A service-rated transfer switch. Select bundles may also include an ecobee by Generac Smart Thermostat, depending on configuration.

Output Ratings

Fuel Type Rated Output
Liquid Propane (LP) 22 kW
Natural Gas (NG) 21 kW

Technical Specifications

Electrical

Rated voltage 240V
Phase 1
Frequency 60 Hz
Power factor 1.0
Rated max continuous load current @ 240V (LP / NG) 92A / 88A
Main line circuit breaker 100A
Total Harmonic Distortion (THD) < 5%
Voltage regulation ±1%

Sound Levels

Normal load operation 67 dB(A)
Quiet-Test™ low-speed exercise mode 55 dB(A)

Sound readings are measured from the front of the generator. Actual sound levels may vary depending on installation conditions.

Dimensions & Weight

Dimensions (L × W × H) 46.4 × 26.3 × 30.7 in (117.9 × 66.8 × 77.9 cm)
Weight (without battery) 451 lb (205 kg)

Dimensions are approximate. Always follow the official installation manual for exact clearances and placement requirements.

Battery Requirement

Battery type 12V AGM Powersport Battery, Group BTX20L
Minimum starting capacity 310 CCA

Engine & Controller Highlights

Generac G-Force™ 1000 Series Engine

  • 2-cylinder, 997 cc engine
  • Aluminum block with cast iron sleeve
  • OHV valve train with hydraulic lifters
  • Electronic governor for constant 60 Hz operation
  • Operating speed: 3,600 RPM
  • Oil capacity including filter: approx. 2.2 qt (2.1 L)
  • Low oil pressure and high temperature shutdown protection

Power Zone™ 200 Controller

  • AUTO / MANUAL / OFF / SERVICE modes with LED indicators
  • Utility voltage sensing with adjustable thresholds
  • Programmable start, warm-up, and cool-down delays
  • Weekly, bi-weekly, or monthly exercise scheduling
  • Adjustable exercise duration from 5–20 minutes
  • AGM-compatible battery charging and fault warnings
  • Protective shutdowns and event logging
  • Firmware updates via cellular or Wi-Fi where enabled

Fuel Type, Usage & Pressure

Fuel Type

Natural Gas (NG) or Liquid Propane (LP)

Fuel Consumption

Fuel 1/2 Load Full Load
Natural Gas 221 ft³/hr (6.27 m³/hr) 311 ft³/hr (8.80 m³/hr)
Liquid Propane 89 ft³/hr (2.45 gal/hr / 9.28 L/hr) 135 ft³/hr (3.71 gal/hr / 14.03 L/hr)

Required Inlet Fuel Pressure

Natural Gas (NG) 3.5–7 in. water column (0.87–1.74 kPa)
Liquid Propane (LP) 10–12 in. water column (2.49–2.99 kPa)
Fuel piping must be properly sized for full-load operation and installed according to applicable code.

Installation Notes

  • 14 in (35.6 cm) flexible fuel line connector included
  • Integral sediment trap
  • External emergency shutdown button on the enclosure

Transfer Switch Options

Unbundled

Best for projects where the generator will be paired with an existing transfer switch or a separately selected load management design.

Bundled System

Includes a 200A service-rated transfer switch with:
  • Fuse control module (FCM)
  • Integrated surge protection
  • Electrically operated, mechanically held contacts
  • Compatible with aluminum and copper conductors
  • NEMA/UL 3R aluminum outdoor enclosure
  • Transfer switch weight: 39.0 lb (17.7 kg)

Energy Management / Load Managers are sold separately when required for optimized startup load handling.

Model Numbers & UPCs

Configuration Model UPC
22 kW Generator (Unbundled) G007260-0 696471103724
22 kW Generator + 200A Transfer Switch Bundle G007325-0 696471104738
Finish: Aluminum enclosure in Metro Gray
Certification note: CETL certification applies to unbundled generator units. Units bundled with the transfer switch are ETL certified in the USA only. Always verify local code requirements for your jurisdiction and configuration.

Popular Add-Ons

  • AGM BTX20L Battery
  • Battery Heater
  • Oil Heater
  • Breather Heater
  • Scheduled maintenance kit
  • LTE LP tank fuel level monitor
  • 50A / 100A Load Managers
Installation Request
Address
Address
City
State/Province
Zip/Postal

Maximum file size: 268.44MB

How urgently do you need it?
Start Over

Thank You For Requesting a Quote!

A member of our team will be in touch shortly to discuss how we can help to meet your needs.